Oil Filter
\nOil filter, oil filtering equipment. By the filter material and structure, can be divided into network-type\u00a0engine\u00a0oil filter, line-gap type, paper type filter, oil filter and magnetic sintered\u00a0filter\u00a0and so on. Filter placed at different positions, but also can be divided into suction\u00a0filter, pressure filter and back to the oil filter, taking into account the performance of self-priming pump, suction filter, mostly coarse filter.
\nFilter indicator
\n\u00a0Hydraulic oil often contains particulate impurities will cause relative movement of hydraulic components, surface wear, catching slide valve, throttling orifice clogging, greatly reduced the reliability of the system work. Installed in the system a certain precision of oil filters, hydraulic system to work is to ensure the necessary means.
\n\u00a0\u00a0\u00a0\u00a0\u00a0 Accuracy is the oil filter filter filter to\u00a0filter\u00a0out impurities in the smallest particle size, the diameter d as the nominal size that, according to the precision can be divided into coarse filter (d <100) ordinary filter (d <10 ), fine\u00a0filter(d <5), special fine filter (d <1).\nGeneral basic requirements of the oil filter is:\n\u00a0\u00a0 (1) to meet the accuracy requirements of the hydraulic systemengine\u00a0 filter that can block a certain size of impurities into the system.\n\u00a0\u00a0 (2) The filter should be of sufficient strength, the pressure will not damage.\n\u00a0\u00a0 (3) The flow capacity and pressure loss.\n\u00a0\u00a0 (4) easy to clean or replace the\u00a0filter.\nTypes and Characteristics\n(1) comb filter\n\u00a0\u00a0\u00a0\u00a0\u00a0 Comb filter, the filter with copper mesh as filter material, has opened a lot of holes around the plastic or metal tube-shaped skeleton, wrapped in a layer or two layers of copper wire, its accuracy depends on the copper mesh layer\u00a0filter\u00a0number and mesh size. This filter structure is simple, flow capacity of a large, easy to clean, but filtering accuracy is low, generally used for the hydraulic pump suction.\n\u00a0 Suction filter is usually installed at the pump suction port, to protect pumps and other hydraulic components, in order to avoid inhalation of contaminants, can effectively control the hydraulic system cleanliness.\n\u00a0\u00a0\u00a0\u00a0\u00a0 Return back to the\u00a0engine\u00a0oil filter for hydraulic oil filtration system, filtering the hydraulic system due to component wear metal particles generated by the heart generated seals contaminants, so that the oil back into the tank clean.\n\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\n\u00a0\u00a0\u00a0\u00a0\u00a0 Currently used are WU-type suction filter coarse filter, and its simple structure, large capacity through oil resistance, easy installation, replacement or repair filter cleaning system is very convenient, and has a\u00a0filter\u00a0and oil pollution sender device bypass valve to improve the reliability of the hydraulic system. XU-A back to the oil\u00a0filter\u00a0oil filter is fine, its simple structure, high precision filter, replace filter cleaning or maintenance of the system is very convenient, and has a sender filter pollution control and oil by-pass valve, can be very effective improve the reliability of the hydraulic system.<\/p>","protected":false},"excerpt":{"rendered":"
Oil Filter Oil filter, oil filtering equipment. By the filter material and structure, can be divided into network-type\u00a0engine\u00a0oil filter, line-gap type, paper type filter, oil filter and magnetic sintered\u00a0filter\u00a0and so on. Filter placed at different positions, but also can be divided into suction\u00a0filter, pressure filter and back to the oil filter, taking into account the […]<\/p>\n","protected":false},"author":1,"featured_media":0,"comment_status":"open","ping_status":"open","sticky":false,"template":"","format":"standard","meta":{"_acf_changed":false,"footnotes":""},"categories":[1],"tags":[],"class_list":["post-2393","post","type-post","status-publish","format-standard","hentry","category-news"],"acf":[],"yoast_head":"\n