뉴스

무엇을 도와드릴까요?

편하신 방법으로 언제든지 저희에게 연락해 주시기 바랍니다. 이메일이나 전화로 연중무휴 24시간 상담이 가능합니다.

신제품

Technology features of diesel engine

Technology features of diesel engine

Engine brand
 Cummins
 Body structure
 Cylinder: Alloy cast iron, replaceable wet cylinder liners.
 Crankshaft: steel structure, all bearing, journal and fillet hardening.
 Piston: Si eutectic alloy, the first ring groove wear ring inlay, oil cooling.
 Intake
 With air / water intercooler turbo exhaust intake.
 Lubrication system
 Using both variable flow pump to optimize the amount of oil into the engine.
 Cooling System
 Centrifugal pumps with built-gear forced water cooling.
 Rotary water filter to prevent rust and corrosion and can effectively remove impurities.
 연료 시스템
 The use of Cummins PT fuel system, patented technology, high-pressure injection, combustion.
 Filtration system
 Equipped with air resistance indicator of dry type air filter.
 Start System
 DC battery to start the motor, with a quick start-up performance.
 Electrical system
 BOSCH sliding gear starter motors, AC alternator.
 Cold start performance
 No auxiliary device, the minimum cold start temperature of -7 °C.
 Technical characteristics of the alternator
 Generating brand ENGGA
 Structure
 Single bearing, three-phase brushless exciter rotating exciter.
 SAE International standards adopted in line with the Mouth and the disc flange connection piece.
 Simply, quickly and easily with the engine flywheel and the flywheel between the connections.
 Electrical system
 Low-impedance winding design can further reduce the harmonic effects.
 Generator stator with 2 / 3 pitch for generators operating in parallel use.
 Stator structure
 Around the double-layer structure Diego.
 End windings using a patented process and the end Diego insulated hoop reinforcement structure.
 Rotor structure
 Whole salient pole lamination, the whole winding process, the coil directly around the pole on.
 Special ventilation and cooling design.
 Using double-insulated flat copper wire, greatly improve the turn, the layer of pressure resistance.
 Insulation
 Standard products, insulation class H.
 Standard IP21 degree of protection products
 Vertical dipping, vacuum coax dry process.

고객님의 요구 사항이 무엇이든, 당사의 장비는 고객님의 비즈니스가 항상 원활하게 운영될 수 있도록 보장해 드립니다.