Engine produce excessive vibration when it work Reason 1: shock absorber or damaged flywheel balancing process: check for loose bolts. Replacement of damaged or flywheel damper Reason 2: broken or worn engine piston rings processing: Remove the exhaust manifold. Check for damp or coke, repair replacement Reason 3: bearing clearance

Exhaust emission Challenges are what drives us. One of the great challenges facing the diesel engine manufacturers is the implementation of the future exhaust emission laws. Regulations for the systematic reduction of pollutant concentrations in the exhaust gases of diesel engines have been introduced in Europe and the USA since

Features on Deutz Construction machines engine BFM1015C series diesel engines Advanced Deutz V-engine. The power is from 214KW to 440KW. The emission is better than Euro II. The torque reserve is from 30% to 45%. The rated speed scope is 1800-2100r/min. It can be fit for many different kinds of

Fuel injection device Fuel injection device can be seen as the heart of the engine, the engine is good or bad, whether the fuel is completely burned as fuel, and fuel it can be a good fogging, spraying time, the injection volume has a great relationship, and that a large

General failure analysis of diesel engine ●engine power decreased or engine produce black smoke: 1, the air filter dirty (clean or replace) 2, the compressor outlet and exhaust pipe connection leaks (tighten the clasp bands or fasteners) 3, the turbine inlet and exhaust pipe connection leaks (replace gasket, FASTENERS) 4,

How to deal with the turbocharger failure? Turbocharger is used to increase engine power and reduce emissions of important parts. As the use, maintenance and improper maintenance, prone to failure, causing the engine not working properly. In this paper, some common turbocharger failure and treatment methods described below: Oil spill

How to maintain diesel engines in winter Recently, with the cold of snow struck the north, the weather getting cold, so winter maintenance of Cummins diesel engine is particularly important, we briefly introduce some of the winter maintenance of the Cummins diesel engine, and I hope to be helpful. First,

How to remove the motor? (1) first remove the motor of the external wiring, and make a mark, for example, asynchronous motors, should be prepared with the three-phase power line to the label, for DC motors, shunt winding should make respectively, armature windings, and external wiring to the label. Then

How to use and maintain the engine properly ? 1, grinding: the run-in This is simply an extension of the use of life, whether it is a new car or overhauled engine, are held in accordance with procedures required after running, before being put into normal operation. 2, the net: